Ook adverteren op gsm-extra.com?

 

Nokia 1610 / 1611 

*#06# for checking the IMEI (International Mobile Equipment Identity) 
*#170602112302# shows the SW version. 



Nokia 2010 

To view IMEI number *#06# 
To view Software Version enter *#9999#
*3001#12345 for field test mode and nam selection and some other stuff... 

 

Nokia 3210

*#06#   for checking the IMEI of the phone
*#0000#   shows the software version.

 

Nokia 3310

*#06#  To find IMEI (International Mobile Equipment Identity)

*#7780# restores Factory Settings..(Memory, language, counters not included)

*#3110# for checking the phone's software (SW) - called firmware revision information.

*#746025625# [*#sim0clock#]  to check if the Sim-Clock can be Stopped
(Sim-clock-stop is a kind of standby mode which will save battery time)

*#92702689# [*#war0anty#]   Phone asks 'warranty code:'

Press the following warranty code:

6232 (OK) : Displays the Month and Year of Manufacture 
9268 (OK) : Displays Serial Number

7332 (OK) : Displays the date of the last repairment - if  found 
7832 (OK) : Displays (if found) the date where the phone was purchased 

37832 (OK) : Set the Purchasing Date MMYY (This date can be set only once!)
87267 (OK) : Transfers ALL phone numbers, Logo's, and ringtones from other gsm phones

 


Nokia 3810

To view IMEI number *#06#
To view Software Version enter *#3810#

 

Nokia 5110

*#06#   To look for the IMEI of the phone
*#0000#    shows the software version. 

*#746025625#   - [*#sim0clock#]
Looks if the sim clock can be stopped. Sim clock stop is a kind of stand-by mode which will save battery time. This code doesn't work with software version 4.59.

*3370#   activates the Enchanced Full Rate, after the phone has been turned off. EFR produces better voice quality but also consumes more power.
#3370#   deactivates the EFR, after the phone has been turned off.

*4720#   Activates the Half Rate Codec, after the phone has been turned off. HRC produces poorer voice quality but gives your battery better stand-by times.
#4720#   Deactivates the Half Rate Codec, after the phone has been turned off.

Enhanced Full Rate will give you much better sound quality when you enable it. The new EFR codec uses the ACELP compression technology. This technology allows for much great voice quality in the same number of bits as the older Full Rate codec. The older technology was called LPC-RPE. Both operate at 13 kilobits, but you take up more space on the network, so they can charge you more. Talk-time is reduced with about 5%

Half Rate will give you poorer voice quality, which gives the service provider the opportunity to have more calls on the network, and you might get a lower charge from them. Will give you 30% longer talk-time.

 


Nokia 5120

*3001#12345# gives access to NAM1 and 2, sw version, security, alpha tags and heaps of other stuff.


Nokia 5190 

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#5190# shows the SW version. 
*#92772689# (after removing the analog module) shows service menu. 
*3001#12345[OK] to enter test mode. 
*#639# to change NAM. 


Nokia 6080 / 6081 

*#06# for checking the IMEI (International Mobile Equipment Identity) 
*#0000# shows the SW version. 

 


Nokia 6120 / 6160 / 6162 (TDMA phones) 

*#92772689# for checking ISDN number. 
*3001#12345# for field test mode and nam selection and some other stuff... 
*#9999# shows the SW version.


Nokia 6150 

*#06# for checking the IMEI (International Mobile Equipment Identity) 
*#0000# shows the SW version. 
*#92702689# to enter service menu. 


*#92702689# [*#war0anty#]
You don't need the warranty-codes any more - you can just scroll through the information like in any other menu. It has the the same data as 81xx and 31xx phones (with "Edit" button for purchase date, and "User data transfer"). 

Menu: 
1: Displays Serial Number. 
2: Displays the Month and Year of Manufacture (0997) 
3: Displays (if there) the date where the phone was purchased (MMYY) you can here set the Purchasing Date (Warning: You can only do this once - so be careful what you write...) 
4: Displays the date of the last repairment - if found (0000) 
6: The option is for transferring ALL the telephone data (from the memory) to a "box" so that the technician can fiddle with the phone without worrying about the data stored on it. Stuff stored on the SIM is not transferred, but who delivers their phone with the SIM? :) 



Nokia 6190 

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#6190# shows the SW version. 
*#92772689# (after removing the analog module) shows service menu. 
*3001#12345[OK] to enter test mode. 
*#639# to change NAM. 


Nokia 7110

*#06# for checking the IMEI (International Mobile Equipment Identity) 
*#0000# To view Software Version.
*#3370# - Enhanced Full Rate Codec (EFR) activation. It will automatically restart. 
*#3370* - Enhanced Full Rate Codec (EFR) deactivation. It will automatically restart. 
*#4720# - Half Rate Codec activation. It will automatically restart 
*#4720* - Half Rate Codec deactivation. It will automatically restart 
*#746025625# - Sim clock allowed status. 
*#92702689# [*#war0anty#] - takes you to a secret menu with 6 choices:

1. Displays Serial Number. 
2. Displays the Month and Year of Manufacture (0997) 
3. Displays (if there) the date where the phone was purchased (MMYY) 
4. Displays the date of the last repairment - if found (0000) 
5. makes you capebel of transferring user data if you have the gear for it 
6. shows how many hours the phone has been on


Nokia 8260 

Change Alpha Tag
The alpha tag is the message that is displayed on your phone when in digital coverage. This is normally transmitted by the network, but can be overidden to display a different tag. This is done by creating a tag for a personal/residential zone in the phone, and setting this zone to have the same settings as your normal carrier. So when the phone identifies the network system it believes it is in the personal/residential zone and displays the tag you have programmed. 
1) Enter programming mode of the phone by keying *3001#12345# 
2) Find out the ID of your operator by entering the NAM1 menu. Note the Home System ID setting. (16387 on Rogers AT&T in Calgary) 
3) Scroll to and enter PSID/RSID lists (menu 7) 
4) Select P/RSID 1 
5) Scroll to PSID/RSID and change the setting to 1 
6) Scroll to Connected system ID and change the setting to the ID of your system (eg 16387) 
7) Scroll to Alpha Tag and enter the message you would like displayed. 
8) Scroll to Operator code (SOC) and enter coed for your provider such as 2050 for Rogers or 2049 for AT&T 
9) Scroll to Country code and enter 302 for Rogers or 310 for AT&T 
10) Power cycle your phone and hopefully your message will be displayed 
Note: This has only been tested in Calgary on the Rogers AT&T network so may not work on other networks. 


*3001#12345# Programming Menu: NAMs, Fieldtest, Serial Number, P/RSIDs 
*#639# Program Phone Number 
*#92772689# Warranty Information, Serial Number, Life Timer, Build Date, Programmed Date (editable once only) 
*#9999# Display Software Version 



Nokia 8820 / 8860

*3001#12345# gives access to NAM1 and 2, sw version, security, alpha tags and heaps of other stuff.


Nokia 8850 

*#06# for checking the IMEI (International Mobile Equipment Identity) 
*#0000# To view Software Version. 1